Maintenance Technology of Bearing of Sand Maker

The development of artificial sand suits several policies of the govt, and it’s several blessings, for instance, it’s ready to form up for the inadequate provide of the medium and coarse sand within the natural sand resources; it is unnaturally mix the sand grading; the Alimentateur vibrant prix composition of the sand is controlled artificially; numerous tailings and waste stone materials is wont to manufacture the bogus sand. The shortage of sand resources opens wide development space for the popularization and application of artificial sand.
When the sand maker is working, the possible reasons why the bearing becomes warm are lack of oil, dust in the machine and damage of the bearing. The elimination methods are to add oil or cleanse the bearing and change new bearing. After the fine crushing of the sand maker and the drying process of the kiln machine, the grinding mill also plays an important role, so that the correct operation of the grinding mill is also important.
Sand maker is suitable for crushing and reshaping soft, medium-hard and super-hard materials, and it is widely used in all kinds of kiln machine rocks, cement, refractory materials, iron, glasses, artificial sand and stone and all kinds of metallurgical residues, and it has higher production capacity in producing silicon carbide and bauxite and other high-hard and super-hard materials and abrasive-resisting materials. Sand maker is widely used in the pre-phase in the grinding process, and it will produce large quantities of powder rocks and reduce the grinding load whose cost is extremely high. Among the mechanical equipment, it turns to the impacting and grinding effects of the medium and the rocks themselves, makes the granularity of the rocks further small until they are ground to powders. To a service-oriented brand integrity, as the professional manufacturer of complete sets of mining machinery, like china sand washers, Henan Hongxing is always doing the best in products and service.conveyor belt: http://www.crusher-machine.com/n146.html
The size of the sand making equipment and the volume of the oil box in the sand making production line are all small, so that the quantity of the lubricant oil is small, and the temperature of the oil during the working process is relatively high, so that it requires that the lubricant oil has higher heat stability and resistance to oxidation. As for some ore beneficiation equipment, especially for some machines in the mine that is easy to have fire and explosion, it requires lubricant with high non-flame property and the flammable mineral oil can never be used. Because the environment of the mines is very bad, there are a lot of coal dust, rock dust and water; the lubricant will inevitably be polluted by these impurities, so that the lubricant oil has to have better antirust, corrosion resistant and anti-emulsification property.