Best Method of Solving Oil Spill of Ball Mill

When the machine is in operation, if some fractions part can get proper lubrication, it can avoid dry fraction. It is proved that the fraction heat made in a short time can melt the metal of mill machine, thus have a result of damage and even death. (much leaking oil leakage or car appeared to whine, holding shaft, the main failure of this is why).
On the one hand, when the accelerator is turnned up, the fuel charge will also be increased, so the oil will be leaked. To solve this problem, we should turn down the accelerator to lessen the fuel charge. We should pay attention that the adjusting of the accelerator should be handled by the experienced workers, for once it is turnned too small, it will lead to the increasing of friction, if it is not dealt correctly, the ball mill may not work as usual.
On the other hand, after a long run time of the ball mill, Some fuel injection spray hole will be blocked. During this time, the oil prussure will be increased, which will lead to the unblocked holes fuel charge increasing, thus leading to the leaking of oil. To solve this problem, we should clean the oil spray holes, and check them timely, if it shows a sign of blocking, please deal with it immediately. Also, there is a need to pay attention is that the oil spry holes must be cleaned by some soft equipments for the damaging of the spry holes. To a service-oriented brand integrity, as the professional manufacturer of complete sets of mining machinery, like stone crushing plant, Henan Hongxing is always doing the best in products and service.rod grinder: http://www.hxjq-crusher.com/S235.html
The amount of oil of roller and separator must be appropriate. All the rotation device equipments, including gear, motor and coupling machine should be added good lubrication oil. All equipment bearings, electric actuators, drive chains and other moving parts should be added adequate good oil. Check the whether the lubrication oil deteriorated and determine the changing of oil in a regular time.
Our ball Mil is crucial equipment for grinding after materials are crushed. The grinder machine is an efficient tool for grinding various materials into powder. It is widely applied in cement industry, chemical industry, new building materials, fire-resistant materials, fertilizer, porcelain and glass industry etc.
So we have to give the friction positions good lubrication. When the oil flowing to the friction positions, will adhere to the friction surface form a layer of oil film, reduce the friction resistance between parts, and the oil film strength and toughness is the key to play the lubrication.
Oil routine of cement oil and reducer should be smooth and the amount of main cement mill bearing should be appropriate. Cement mill gearbox lubrication oil station, petrol station fuel sliding shoe to appropriate oil to flow.