Abnormal Jaw Crusher With Stopping in Working

Jaw Crusher is generally installed above the concrete foundation. Given the weight of a larger crusher, poor working conditions, and the machine in operation again with great force of inertia to promote the foundation and the machine phylogenetic vibration. Based on vibration are directly caused by other machinery and equipment and building structures vibration. Therefore, the basis of crusher must be separated with the plant base. Meanwhile, in order to reduce vibration, the crusher is placed between the foundation and frame pad rubber or timber.

In the course of operating jaw crusher, sometimes the jaw crusher parking condition can be met suddenly. At this time, if the operator can not find the reason of jaw crusher parking and repair it immediately, the greater damage will be caused and all of stone product must be forced stop operation, so the abnormal jaw crusher parking will bring great loss for enterprise. Well, why the jaw crusher parking and how to deal with this situation are very important.

1. In the process of jaw crusher operation, some workers will keep adding to the ore material to feed the inlet. As a result, the feeding material will be more than the carrying capacity of the machine, it will cause a blockage of the inlet. The jaw crusher parking will happen in this situation, the operators must clean up the crushing cavity before restarting, and evenly feed the material to avoid jaw crusher parking.

2. Jaw Crusher is transmitted power by the drive belt, so if improper belt tension will cause jaw crusher parking. So the belt should be checked before you start the machine each time to see if the under belt is appropriate.

3. Timely check up all the bolts of jaw crusher machine, the loosen bolts also can cause jaw crusher parking in the course of operation.

4. Tightening busing obstruct has axial pulsation.

5. The bearing is wore out or even the retainer is damaged., etc.

6. Not the temperatures within the bearing is rising, however the jaw's seal include and also the finish include clashed to produce heat or even the frame.bearing's double besom rotates collectively using the principal axe and generates heat by clashing.

In operation, you should take regular inspection, through the see, hear, touch ways such as broken mine machine parts observation status and bearing temperature, bearing temperature cannot exceed 60 ℃ high temperature, and if I found bearing don't stop immediately, take increase the amount of oil, the forced ventilation cooling, stay bearing, such as temperature drop before stopping, check and remove the faults.

The article is provided by Hongxing company,As the professional manufacturer of complete sets of mining machineryDryer machine, Henan Hongxing is always doing the best in products and service.